Kiwire™ 2.0

Device Configuration : Huawei AP5030DN (FAT Mode)

19 views March 29, 2018 admin 0

Configuring Portal Authentication for Wireless Users

1. Navigate to Wizard.
2. Click “Create” to create SSID.

3. Enter SSID eg: HUAWEI-8300
4. Security setting: Portal
5. Portal server : External Portal Server

External Portal Setting

6. Enter Server template name (any name for own reference)
7. Enter Server IP address : Kiwire IP
8. Port number : 50100
9. Enter Server URL : https://(Kiwire IP)/user/nas/huawei/

External Radius Configuration

10. Enter Server template name (any name for own reference)
11. Authentication server IP : Kiwire IP
12. Port number 1812
13. Shared key : (Password) * must same as at Kiwire

14. Navigate -> Configuration -> Security -> AAA -> External Portal Server
15. Under Portal Authentication Server List, click on created server name.

16. Click URL Option Setting to show option
17. Check box and key in details as follows :

  • User access URL: user-url
  • User IP : user-ip
  • SSID : huawei-ssid
  • System name : huawei-sysname
  • AP-MAC: Huawei-mac

18. Navigate -> Configuration -> Security -> AAA -> RADIUS
19. Select RADIUS Server Profile
20. Check Authentication box : port number 1812
21. Check Accounting box : port number 1813

Was this helpful?