Kiwire™ 2.0

High Availability

57 views May 30, 2017 May 13, 2019 admin 0

High Availability

The High Availability module let’s you configure the high availability capability of Kiwire™. The high availability module will provide Fail over capability to the passive Kiwire™ system, at any point of time only one of the pair will be active. The high availability module will perform automatic synchronization of data base and media files between the cluster nodes via secure communication. To access High Availability module go to Configuration > High Availability.

* NOTE : Please ensure both Kiwire™ units are licensed and running on same firmware.

The field and its function description is listed below.

Field Function
Enable HA Enable or Disable HA functionality.
Role Select the role of this instance of Kiwire™, the Primary unit of Kiwire™ will be Master and Secondary Kiwire™ Unit will be the Slave unit. Currently dual master configuration is not supported.
Master IP Address The IP address of Master Kiwire™ instance.
Slave IP Address The IP address of Slave Kiwire™ instance.
Master Public Key The generated result of Master Kiwire™ public key, use generate key function.
Slave Public key The generated result of Slave Kiwire™ public key, use generate key function.
Time Interval for Synchronization Time interval for synchronization between clusters.
Synchronization Status Status of data synchronization.

  • Up to date : System detected all node within cluster are up to date.
  • Failed : Data synchronization  failed.


Button Function
Generate Key Click on Generate Key to generate the security key , on Master it will generate they key for slave field , you need to perform the same generate key function on slave and copy the key to the Master key field.
Revoke All Authorized Keys This will revoke all key stored on system, you will need to use “generate key “ function to generate new key and perform exchange between node.

Was this helpful?